Falcon Locks Mansfield TX Rekey & Replacement (214)838-7730

If you want a dependable, budget-conscious lock upgrade for your home, rental, or business in Mansfield, a Falcon lock change might be just right for you. Whether you lost keys, moved into a new house/office, experienced stolen keys, had a security concern, or just want a reliable Deadbolt or cylindrical lock upgrade — Falcon offers solid locksets suitable for many residential and light commercial doors. Lock Change Mansfield provides mobile locksmith service to install or rekey Falcon hardware on-site, giving you secure locks without stress or delay.

Our technicians evaluate your door type, frame condition, and security needs before recommending the right Falcon lock solution. Whether you need a simple cylinder swap, a deadbolt replacement, or rekeying after tenant turnover or lost keys, we handle the job with professional tools and quality workmanship. With Falcon lock change in Mansfield, you get dependable hardware, expert installation, and locksmith support when you need it most.

Why Using Falcon Locks

Falcon locks offer a good balance of affordability and basic security — making them a practical choice for homeowners, rentals, and light commercial properties in Mansfield looking for a straightforward, cost-effective lock change. Their hardware tends to be simpler and easier to install than many high-end brands, which can save on labor time and keep installation costs down while giving you basic locking protection.

For exterior doors, apartments, rental units, or budget-conscious upgrades, Falcon deadbolts and cylindrical locksets provide acceptable security when properly installed. They work well for secondary entries, garages, interior apartments, or rental units where ease of maintenance and straightforward keying often matter more than heavy-duty security features.

The downside is that Falcon hardware does not provide the same level of tamper resistance, pick or drill resistance, or long-term durability as premium locks. Bolts and internal components tend to be lighter duty, and they may show wear sooner under heavy use. For main entry doors, high-traffic commercial spaces, or high-security needs, a stronger lock might be a better investment.

That said, for many normal residential and low-impact commercial uses, Falcon represents a “good enough” upgrade over old, worn, or basic builder-grade locks — especially when installed correctly with reinforced strike plates and proper alignment.

Falcon Lock Rekey

If you already have Falcon cylinders installed and simply need to reset keys due to lost keys, tenant changes, or staff turnover, we can rekey them quickly and affordably. Rekeying involves rearranging the internal pins so old keys no longer work and you get new, unique keys under your control — a simple but effective way to reset access without replacing the entire lockset.

Because Falcon cylinders are basic pin-and-tumbler designs, rekeying is straightforward and often less expensive than rekeying high-security brands. This makes Falcon rekey a budget-friendly choice for rental properties, multiple-unit buildings, or when you want to control access across several doors in Mansfield without overspending.

We inspect each lock carefully before rekeying. If the cylinder shows signs of wear, damage, or corrosion, we may recommend replacing the lock instead — to avoid lock failure down the road. After rekeying we test each lock thoroughly to ensure smooth operation before we leave.

Falcon Lock Options & Smart-Ready Possibilities

Although Falcon hardware is mostly basic mechanical locksets, many of their deadbolts and cylindrical locks can accept retrofit hardware or aftermarket smart-lock adapters. This gives homeowners and small businesses flexibility: start with a budget-friendly Falcon deadbolt today, then upgrade to keypad or smart-lock functionality later if desired.

For example, you might begin with a standard Falcon deadbolt for your exterior door and later install a keypad or retrofit smart-lock insert if you want keyless entry or remote access. While these are not as refined as high-end smart locks, for light-use doors or rental units in Mansfield they can be a cost-effective and practical solution.

Because Falcon hardware tends to use standard lock formats and door preps, retrofit or upgrade installations are usually simpler, minimizing drilling or frame modifications. That flexibility can make Falcon appealing for landlords or property managers who want to upgrade incrementally without replacing every lock at once.

Do It Yourself VS Using Professional Locksmith

Falcon locks are easier to work with than many premium lock brands, and some homeowners might be tempted to install or rekey them on their own. For basic deadbolts on straight, well-aligned doors, this may be feasible. But older doors, worn frames, or uneven jambs often create issues — misaligned bolts, sticking doors, or noisy operation are common DIY pitfalls.

Using a professional locksmith ensures correct alignment, proper strike reinforcement, and precise cylinder installation. Our Lock Change Mansfield technicians bring tools and know-how to ensure the lock works smoothly and securely. We double-check bolt throw, test lock operation, and ensure doors close properly. For smart-lock retrofit or rekey jobs, we also verify proper fit and function before leaving — giving you reliability you rarely get with DIY installs.

Additionally, professional service comes with warranty on parts and labor. DIY installation offers no protection if something goes wrong later. For entry doors, rental units, or frequently used doors, that peace of mind and long-term reliability usually outweigh the upfront cost.

Common Falcon Locks We Work With

Here are three of the most commonly used Falcon locksets in Mansfield properties — each suitable for different door types and usage needs.

Falcon Single Cylinder Deadbolt

Falcon Single Cylinder Deadbolt — a straightforward deadbolt offering basic residential security, ideal for exterior doors on homes or rentals where budget and simplicity matter most.

Falcon Cylindrical Lever Lock

Falcon Cylindrical Lever Lock — a basic lever lock suitable for interior doors, side entries, or lower-security doors in rental units or commercial spaces, balancing affordability and ease of use.

Falcon Adjustable Backset Deadbolt Lock

Falcon Adjustable Backset Deadbolt — a flexible option when replacing older or non-standard doors, useful when exact backset measurements are unclear, making installation easier while maintaining basic security.

How much does a Falcon lock change service cost?

The cost for a Falcon lock change or rekey in Mansfield depends on lock type, number of doors, and whether you choose basic mechanical hardware or plan to retrofit smart-lock features. Below is a general estimate table for typical Falcon services. Final price will be provided after on-site inspection and depends on door/frame condition and hardware supplied.

Why choosing Lock Change Mansfield

Lock Change Mansfield is dedicated to honest, affordable, and reliable locksmith service for brands like Falcon — and we treat every job seriously, whether it’s one lock or a full rental property. We assess door and frame condition, recommend the correct hardware, and install locks with proper alignment and strike reinforcement to ensure smooth operation and reasonable security.

We are licensed, bonded, and insured, and we bring mobile service across Mansfield and nearby areas, often able to complete jobs the same day. We provide transparent pricing, clear options, and help you understand when Falcon is appropriate — and when a stronger lock might be a better choice. We also offer a six-month warranty on parts and labor so you get peace of mind and support after installation.

Whether you just need a basic deadbolt for a rental, a straightforward lever lock for interior doors, or a retrofit-ready setup for future upgrades, Lock Change Mansfield offers straightforward, honest service to meet your needs — without upselling unnecessary hardware.

Frequently Asked Questions about Falcon Locks

Are Falcon locks secure enough for a front door?

For standard residential homes or low-traffic rental units, a properly installed Falcon lock provides acceptable basic security — especially if combined with reinforced strike plates and a solid door frame.

Can Falcon locks be rekeyed later?

Yes. As long as the cylinder is in good condition, we can re-pin it so old keys no longer work and issue new keys at relatively low cost.

Can you upgrade Falcon locks to smart locks later?

Often yes. Many Falcon deadbolts and levers use standard lock prep and can accept retrofit smart-lock kits or aftermarket electronic modules, giving flexible future upgrade potential.

Will DIY installation of Falcon locks work fine?

Possibly for simple installations on good doors, but misaligned frames or older doors often cause sticking, poor bolt throw, or security weaknesses. Professional installation ensures correct alignment, smooth operation, and proper longevity.

Do Falcon locks require a lot of maintenance?

No — regular door and strike inspection, occasional lubrication of moving parts, and securing hinge screws is usually enough to keep them operating smoothly.

Is it worth paying for a locksmith for budget-grade locks like Falcon?

Yes, especially if you want proper installation, smooth operation, and reliability over time. A professional install reduces risk of problems and ensures the lock performs as expected.

How long does a typical Falcon lock change or rekey take?

Most residential jobs take about 30 to 90 minutes depending on the number of doors and complexity. Rekey or simple deadbolt change is usually quicker than full door/frame adjustments.

Are Falcon locks better than no lock or padlocks?

Absolutely. Even a basic Falcon deadbolt provides much better security and door integrity than padlocks or makeshift locking solutions. It’s a solid, practical upgrade for many homes and rental properties.

Can Falcon locks be keyed alike across multiple doors?

Yes. If the cylinders are compatible, we can key multiple Falcon locks alike so one key opens several doors — useful for landlords and rental properties to simplify access management.

Do you provide warranty on Falcon lock installations?

Yes. All permitted work from Lock Change Mansfield includes a six-month warranty on parts and labor, ensuring support in case of installation issues or early wear.

Conclusion

For homeowners, landlords, or light commercial properties in Mansfield looking for dependable, budget-friendly lock upgrades, Falcon lock change can be a practical solution. With correctly installed deadbolts, lever locks, or retrofit-ready cylinders, you get functional security without overspending. Lock Change Mansfield provides professional installation, honest pricing, and solid workmanship to make that happen — even for simple or budget-level hardware.

We serve Mansfield and surrounding areas like Arlington, Grand Prairie, Burleson, Cedar Hill, Midlothian, and Forest Hill, covering nearby ZIP codes including 76063, 76001, 76002, 76028, 76060, 76065, and more. Wherever you are, we bring mobile locksmith service and expertise so your doors get fixed or upgraded fast.

With transparent quotes, licensed technicians, and a six-month parts and labor warranty, Lock Change Mansfield is a trustworthy partner even for budget lock changes. If you’re ready to secure your property with Falcon hardware, contact us — we’ll help you choose the right set-up and install it right the first time.

References

• Allegion / Falcon Locksets – Official Site
• Allegion Door Lock Buyer’s Guide
• Locksmith Ledger – Should You Rekey or Replace Your Locks?
• Consumer Reports – Door Lock Security Guide